top of page

Studio Pedalboard - 

Core Tones

Assigned Amp(s): 

All

Core Guitar Tones
Core Guitar Tones

Core Tones

Image-empty-state_edited_edited_edited.j

The Analog Effects Mixer

Category: 

Utility

ZED-10

Maker: 

Allen & Heath

The ZED-10 Analog Mixer's role is to mix the Strymon stereo effects, along with the Source Audio pedal effects.

It is also used to support the analog stereo signals from the MacPro Laptop and the iPad Pro.

Pedalboard: 

Effects Mixing

The ZED-10 Analog Mixer's role is to mix the Strymon stereo effects, along with the Source Audio pedal effects.

A mono gain staging, level controlled, feed from the Stage Amps SwitchBlade active distribution box on the ZED-10's channels 7 & 8 provides a dry Stage Amp guitar tone to blend with the two stereo effects pedalboards.

The Allen & Heath ZED-10 is the perfect center to your portable live rig - and it's also ready to rock in the studio.

First of all, the ZED-10 gives you all the connections you need to hook up a small band, a duo, or a solo performer. The four mic/line channels you can connect all the mics and DI boxes you need.

Plus you've got three dual-stereo channels available, each with a gain control and a 2-band EQ. You can send a stereo signal via USB right to your computer, or use the USB port for stereo playback. Plus, you get three send/return busses for recording, playback, and external FX.

Image-empty-state_edited_edited_edited.j

Bedroom Amp Stereo BBE Sonic Maximizer

Category: 

Emphasis

882xI

Maker: 

BBE

Bedroom amps mono to two channel sonic enhancer to feed th Blackstar and Tone King tube amps

Pedalboard: 

Bedroom Amps

The BBE is a device that adds emphasis to the stereo signals fed to it by the JHS Active ABY distribution switch

This device is required to send the mono Bedroom amps pedalboard signal to the Bedroom amps through the JHS Clover preamps and signal managed through the LPD discreet signal buffers.

Image-empty-state_edited_edited_edited.j

Switchbone - Bedroom Amps

Category: 

Distribution

SwitchBone V2

Maker: 

Radial

Wet/Dry/Wet Black Spirit and Strymon Effects board Core Tone Active Distribution

Pedalboard: 

Pedalboard Routing

Switchbone #2:

This is the second of two Switchbone distribution boxes.

It is used to drive the Wet/Dry/Wet Triple Amp configuration pedalboards.

With the Radial Switchbone V2 ABY/C amp selector and booster, you can effortlessly toggle between and combine up to three guitar amplifiers with a tap of your foot.

Switching is completely silent, by virtue of high-performance opto-couplers.

Buzz and hum aren't an issue either, thanks to transformer-isolated outputs.

Replicate the tone and feel of being connected directly to your amp with the Switchbone V2's Drag control.

A variable Baseline buffer control boosts the front end of your amp for extra punch, and a built-in power booster achieves up to +18dB of clean gain.

The Radial Switchbone V2's Class A input buffer ensures top-quality sound, enabling longer cable runs without signal degradation.

Image-empty-state_edited_edited_edited.j

Switchbone - Stage Amps

Category: 

Distribution

SwitchBone V2

Maker: 

Radial

Stage and Bedroom amps Core Tone Active Distribution

Pedalboard: 

Pedalboard Routing

Switchbone #1:

This is the first of two Switchbone distribution boxes.

It is used to drive the Stage and Bedroom amps pedalboards.

With the Radial Switchbone V2 ABY/C amp selector and booster, you can effortlessly toggle between and combine up to three guitar amplifiers with a tap of your foot.

Switching is completely silent, by virtue of high-performance opto-couplers.

Buzz and hum aren't an issue either, thanks to transformer-isolated outputs.

Replicate the tone and feel of being connected directly to your amp with the Switchbone V2's Drag control.

A variable Baseline buffer control boosts the front end of your amp for extra punch, and a built-in power booster achieves up to +18dB of clean gain.

The Radial Switchbone V2's Class A input buffer ensures top-quality sound, enabling longer cable runs without signal degradation.

Image-empty-state_edited_edited_edited.j

Bedroom Amp Tone King Clover Preamp

Category: 

Preamps

The Clover

Maker: 

JHS

Drives the Tone King Tube amp

Pedalboard: 

Bedroom Amps

The Tone King tube amp is gain staged with this JHS Clove preamp and signal managed by an LPD isolation Buffer pedal

The Clover is an end all preamplifier / boost circuit for any electric, acoustic, or bass player. The EQ is simple, powerful and doesn’t allow a bad sound. No matter what style of music you play or amp that you use, the Clover will prove to be an indispensable tool.

Image-empty-state_edited_edited_edited.j

Bedroom Amp Blackstar Clover Preamp

Category: 

Preamps

The Clover

Maker: 

JHS

Drives the Blackstar Tube amp

Pedalboard: 

Bedroom Amps

The Blackstar tube amp is gain staged with this JHS Clove preamp and signal managed by an LPD isolation Buffer pedal

The Clover is an end all preamplifier / boost circuit for any electric, acoustic, or bass player. The EQ is simple, powerful and doesn’t allow a bad sound. No matter what style of music you play or amp that you use, the Clover will prove to be an indispensable tool.

Image-empty-state_edited_edited_edited.j

Stage Amps Dirty Rats

Category: 

Distortion

Dirty Rat

Maker: 

JHS

Primary distortion pedal driving the Stage Amps: Kelley F.A.C.S. 30/60 and the Fender Twin Reverb

Pedalboard: 

Stage Amps

The Dirty Rat has nine ProCo Rats, and historical variations, to create the iconic guitar tones of the 70s, 80s, and 90s. The variations add a modern Rat tone to the Stage Amps.

The JHS PackRat aims to solve the riddle, "How many rodents can you stuff into a single stomp box?" The answer is apparently nine, because that's how many rodent-style tones you can coax out of this distortion pedal.

Like the Muffuletta did for fuzzes and the Bonsai did for green overdrives, the PackRat supplies you with a myriad of Rattus norvegicus-style sonic textures.

This flexible stomp really burns, able to churn out mild overdrive, metallic grind, and cacophonous fuzz with equal aplomb, leaning on four decades of tried-and-true — and some quite rare — ratty tones. Best of all, the PackRat doesn't use digital modeling.

Rather, it boasts the exact same components as the source units.

So, when you select a mode with the PackRat's rotary control, your guitar signal actually passes through a replica of the original pedal's circuitry.

Just about every pedalboard has a large-mouse-like stomp box on it, but with the JHS PackRat, you can have all the rodents.

Image-empty-state_edited_edited_edited.j

The Switchblade

Category: 

Utility

Switch Blade Pro

Maker: 

Electro-Harmonix

Active signal distribution to Core pedals and Strymon Stereo Wet/Dry/Wet effects board.

Pedalboard: 

Pedalboard Routing

The Switchblade Pro take a Core Guitar feed from the Switchbone #1 and distributes it to three destinations: The Kelley amp, The Fender Twin amp, and the ZED 10 mixer for stereo effects dry guitar blending from the Stage Amp pedalboard

Switch between two amps or turn them both on a once - Setup your effects loops to run in series or parallel, control what loops are on and, in series mode, what their order is. - Multi-instrumentalists can connect up to three instruments into one amplifier - Mix three instruments together and control the volume of each. - With its Dry Level control, the Switchblade Pro is great for bass players - The Switchblade Pro prevents tone-suck when vintage, non-true bypass pedals in its FX loops are disengaged.

Image-empty-state_edited_edited_edited.j

JHS ABY

Category: 

Utility

Active ABY Switch

Maker: 

JHS

Signal distribution to the Core Guitar board and the Source Audio Stereo Digital pedalboard.Digital

Pedalboard: 

Bedroom Amps

The JHS Pedals Active A/B/Y is the perfect solution when you need to send one signal to two outputs with the ability to choose either output (or both) on the fly.

With an output transformer, FET transistors for completely silent switching, the capability to use one or both outputs simultaneously, the JHS Pedals Active A/B/Y will be the one pedal that you can never leave home without!

Image-empty-state_edited_edited_edited.j

Soleman MIDI

Category: 

Utility

Soleman MIDI Controller

Maker: 

Source Audio

Stereo Digital effects programmable Source Audio MIDI controller

Pedalboard: 

Source Audio Digital Effects

The Soleman is a versatile, highly configurable hardware and software MIDI controller housed in a durable, compact package.

It has two hardware MIDI outputs, which allow it to interface with any hardware that adheres to the MIDI standard. It also has a USB-MIDI interface for direct control of MIDI-compatible software such as DAWs (Digital Audio Workstations), virtual instruments, synths, or VST plugins

Image-empty-state_edited_edited_edited.j

Neuro Hubber

Category: 

Utility

Neuro Hub

Maker: 

Source Audio

Stereo Digital effects programmable Source Audio control hub

Pedalboard: 

Source Audio Digital Effects

Got Source Audio One Series or Soundblox 2 stompboxes? Then you need the Neuro Hub — it brings full MIDI functionality to up to five pedals.

The Neuro Hub makes building a multi-pedal system with 1-step preset recall easy. Its connections are clearly laid out: a 5-pin MIDI In and MIDI Out/Thru, along with a TRS expression pedal input, Sensor input, mini USB port, and five Multi-Function outputs.

bottom of page