Studio Mics - 

The SoundID Calibrator

Details for the 

Measurement Mic

General Description

Image-empty-state_edited_edited.jpg

The SoundID Reference Measurement Microphone is used with Sonarworks SoundID Reference Room Calibration software to fine tune a studio control room after it had been acoustically treated.

Comments

A speaker and headphone calibration software delivering consistently accurate studio reference sound.

In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets.

With an applied calibration profile, the software sets the frequency response target to be completely flat across all audible frequencies so you can make music that sounds great everywhere.

You can also now make custom adjustments to the target curve in real-time with the new custom target feature.

With accurate studio reference sound, you can seamlessly switch between speakers, headphones, and rooms.

Mic Type

Polar Pattern

Impedance

Max SPL

Small Diaphram Condensor

Omnidirectional

250 ohms

132 dB

Studio Role

Reference measurement microphone

Diaphragm Size

N/A

Sensitivity

Maker

Purchased from

-37dB/Pa (14 mV)

Sonarworks

Sweetwater

Freq Response

20 Hz - 20kHz

Mic Cost

Replacement Cost

$

75

$

60

Phantom Powered?

Yes

Shock Mounted?

No

Output Transformer?

No

Low Pass
Filter?

High Pass
Filter?

No

No

Low Pass
Frequency

High Pass
 
Frequency

[Low Freq]